Beschreibung
The UCTRONICS gigabit PoE splitter is used to supply power and transfer data to micro USB devices like RPi 3B+ via a single Ethernet cable with the help of an IEEE 802.3af compliant switch or injector. You don't need a separate power supply anymore. It uses no GPIO pins and is thus compatible with any 3b+ case with a fan or add-on 3b+ screen. It has plug-and-play compatibility with 3B+ and makes it easier for deployment, operation and maintenance in embedded and IoT projects.
uctronics Poe splitter u515902
Features:
- 5V/2.4A & 1000Mbps - Power micro-USB devices via an Ethernet cable, along with gigabit data transfer (which you can put aside if you only need power)
- PoE HAT Alternative - Use no GPIO pins. Compatible with Raspberry Pi case with fan or add-on screen. Support Raspberry Pi 3b+ and previous models
- Extend Powerline - Deliver power to micro USB devices without nearby AC outlets and upgrade them to PoE (Power over Ethernet) from up to 400 feet
- Replace Power Supply - Remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devices
- Save Your Time - Plug and play compatibility and quick seller response. NOTE: an 802.3af compliant PoE injector/switch is required to use this device (not included)
Specifications:
Compliant with IEEE 802.3af
Isolation: 2.5kV
Input: 802.3af 44-56V Mode A&B 300mA
Power Output: DC 5V/2A(up to 2.5A) 10W
Data Transfer rate: 10/100/1000 Mbps
Devices will be detected before poe input
Power Pin: support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
Package Including
1pcs 48V to 5V Active PoE Splitters Micro USB Power Plug
The gigabit version update of UCTRONICS U5159 PoE splitter(ASIN:B01MDLUSE7)
Additional Resources:
- User Guide – UCTRONICS Gigabit PoE
- Blog – UCTRONICS Gigabit PoE
Versandgewicht: | 0,10 Kg |