Beschreibung
POE HAT for Raspberry Pi
Power Over Ethernet HAT for Raspberry Pi 3B+/4B, 802.3af/at-compliant(any backward-compatible future versions will be supported as well)
12V and 5V power outputs to support more peripherals![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/accBoard/PoE-HAT-C/PoE-HAT-C-details-1.jpg)
Features at a glance
The PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 3B+/4B . By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
- Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
- PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant
- Fully isolated switched-mode power supply (SMPS)
- While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device
- Onboard high speed active cooling fan, better heat dissipation
Specifications
PoE power input | 37V ~ 57V DC in |
---|---|
Power output | USB-A: 5V 4A (MAX) 2P header: 12V 2A (MAX) |
Network standard | IEEE 802.3af/at PoE |
Dimensions | 56.5 × 65mm |
For use with Raspberry Pi 3B+/4B
Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/accBoard/PoE-HAT-C/PoE-HAT-C-details-3.jpg)
Power Over Ethernet
providing both network connection and power supply for your Raspberry Pi in one cable
![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/accBoard/PoE-HAT-C/PoE-HAT-C-details-5.jpg)
5V USB-A & 12V header outputs
5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power)be able to power extra device while providing stable power to Raspberry Pi
![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/accBoard/PoE-HAT-C/PoE-HAT-C-details-7.jpg)
Active Cooling fan
![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/accBoard/PoE-HAT-C/PoE-HAT-C-details-9.jpg)
Onboard MP8676 buck chip
Incorporates original voltage buck chipproviding up to 4.5A output for Raspberry Pi and USB-A port
![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/accBoard/PoE-HAT-C/PoE-HAT-C-details-11.jpg)
Outline dimensions
![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/accBoard/PoE-HAT-C/PoE-HAT-C-details-size.jpg)
Resources & Services
![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/LCD/common/res_banner.png)
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Selection guide
Product | Supported Pi | PoE standard | PoE power output | Feature |
---|---|---|---|---|
Raspberry Pi PoE HAT | 3B+/4B | 802.3af | 5V 2.5A | Raspberry Pi official |
Raspberry Pi PoE+ HAT | 802.3af/at | 5V 4A | Raspberry Pi official (second generation) | |
PoE HAT (B) | 802.3af | 5V 2.5A | with OLED display, cost effective | |
PoE HAT (C) | 802.3af/at | 5V 4A / 12V 2A | high power, cost effective | |
PoE HAT (D) | 802.3af | 5V 2.5A | tailored for Raspberry Pi official case, cost effective |
Package Contents
- PoE HAT (C) x1
- Heatsink x1
- Standoffs pack x1
![](https://www.welectron.com/mediafiles/productimg/waveshare/devkit/accBoard/PoE-HAT-C/PoE-HAT-C-details-pack.jpg)
Versandgewicht: | 0,07 Kg |