Arducam B0181 IMX219-AF Programmable/Auto Focus Camera Module for NVIDIA Jetson Nano/Xavier NX
Beschreibung
This Arducam IMX219AF camera module is designed mainly for the NVIDIA® Jetson Nano platform and also can be used on other hardware like ARM, DSP, FPGA, etc.
The highlight of this camera is that the lens focus is programmable by software, and Arducam team provides an open-source code to implement software auto-focus function for Jetson Nano.
Note: This camera is released for official Jetson Nano/Xavier NX boards. It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+), but it does not support the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4) and other third-party boards.
- Shutter Type: Rolling Shutter
- Color Type: Color
- IR Sensitivity: Visible light, Integral IR Filter
- Interface: MIPI
- Format: RAW Baye
- Sensor type: IMX219
- Optical Size: 1/4 inch
- Lens spec: EFL: 2.8mm, F.NO: 2.2, Focus Type: Programmable/Auto Focus, View Angle: 77.6 (Diagonal)
- Interface Type: 2-Lane MIPI
- Output format: RAW8/RAW10
- Frame Rate: 21fps@8MP, 30fps@1080p, 120fps@720p
- Horizontal FoV:65°
- Vertical FoV: 51°
- Focus distance: 80mm~infinity
- Unmanned Aerial Vehicles (UAVs)
- Building Drones
- Autonomous Robotic Systems
- Mobile Medical Imaging
- Intelligent Video Analytics (IVA)
- Sensor Datasheet – Sony IMX219
- Arducam MIPI Cameras for Jetson Nano
- 3D Drawing
- How to Use Motorized Focus Camera Module
- 1pcs Arducam IMX219AF auto focus camera module
Versandgewicht: | 0,02 Kg |