Bambu Lab PLA Metal Filament on Spool
Description
Bambu PLA Metal is a metallic textured filament designed to enhance the aesthetic of your prints. It is designed to mimic the surface texture of metal, but it does not contain actual metal fillers.
With its advanced metallic shine, this filament offers a professional and high-end finish, adding a touch of sophistication to your prints while retaining almost the same comprehensive performance as regular PLA.
Printing Tips
- Recommended Build Plate: Cool Plate, High Temperature Plate, or Textured PEI Plate.
- Feel free to reuse your Bambu Reusable Spool. Bambu Lab has built the entire filament feeding system around a reusable spool design and achieved at least 20% less plastic waste in filament consumption.
- All printing parameters are embedded in RFID, which can be read through Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.
Model Overview
| Color | Hex Code | Display |
|---|---|---|
| Iridium Gold Metallic | #B39B84 | |
| Copper Brown Metallic | #AA6443 | |
| Oxide Green Metallic | #1D7C6A | |
| Cobalt Blue Metallic | #39699E | |
| Iron Gray Metallic | #43403D |
| Recommended Printing Settings | |
|---|---|
| Drying Settings (Blast Drying Oven) | 55 ℃, 8 h |
| Printing and Keeping, Container's Humidity | <20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 - 230 ℃ |
| Bed Temperature (with Glue) | 35 - 45 ℃ |
| Printing Speed | < 300 mm/s |
| Physical Properties | |
| Density | 1.25 g/cm³ |
| Vicat Softening Temperature | 62 ℃ |
| Heat Deflection Temperature | 62 ℃ |
| Melting Temperature | 160 ℃ |
| Melt Index | 38.6 ± 3.7 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 34 ± 4 MPa |
| Breaking Elongation Rate | 14.7 ± 1.5 % |
| Bending Modulus | 2290 ± 210 MPa |
| Bending Strength | 66 ± 3 MPa |
| Impact Strength | 58.9 ± 3.4 kJ/m² |
Package Contents
- Filament x 1 & Desiccant x 1
- Package x 1
- Filament Label x 1
