TekBox DC-LISN-Combo1 DC LISN Bundle
Artno.: TB4-110000
Impedance Stabilisation Network Bundle

899.00 € incl. 19% VAT
755.46 € excl. VAT
On stock

Shipping time: 1 - 3 business days

Description

The TBOH01 5μH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz.
The LISN is inserted into the supply line of the DUT (Device Under Test). Conducted noise which is present at the supply terminals of the DUT can be measured at the BNC connector using a spectrum analyzer or a measurement receiver. The source (supply) terminal and the DUT terminal are decoupled by a 5μH inductor.

The TBLM1 is a companion device for LISNs, which splits the conducted noise signal into its common mode and differential mode components. The LISN Mate is connected to the output of a LISN inserted into the positive supply line and to a second LISN inserted into the negative supply line. The conducted noise signal at the output of a LISN is the sum of common mode and differential mode noise. The LISN mate splits it into the common mode and differential mode components, with each signal component available at a separate BNC port.

Included

  • 2x TBOH01
  • 1x TBLM01
  • 1x BNC Termination
  • 2x N-Male to BNC-Male 75 cm RG58
  • 1x BNC-Male to BNC-Male 35 cm RG223

Shipping weight: 1.50 Kg

Review this product

Average product review

Write your first review and help others with their purchase decision: