UCTRONICS U6162 SSD Mounting Plate for Raspberry Pi 1U Rackmount
Beschreibung
Designed for Raspberry Pi 1U Rackmount
- The mounting plate is specifically designed to allow a 2.5" solid-state drive to be mounted in UCTRONICS 19" rackmount (ASIN: B08F9X528J).
- You can connect up your 2.5" solid-state drive on your Raspberry Pi to get bigger attached storage and speed up data transmission.
Note:
- The product does not include 2.5-inch SSDs
- The thickness of the SSD cannot exceed 9mm.
- If you use a 9mm SSD, you need to flip it over for installation.
Support 2.5" Solid State Drives
- Fully compatible with 2.5-inch SSD (Not included)
- An optimal solution to realize fast data transfer
- Beautify the workspace, make your rack neater artistic
- A sturdy gauge of 1.2mm carbon steel
- 2 slots for mounting the rack
- 4 slots for fixing the SSD
Packing List:
- 1 pcs Mounting plate
- 1 pcs 50cm SATA to USB 3.0 data cable
- 1 pcs Male to male USB 3.0 cable
- 1 pcs USB 3.0 female to female connector
- 4 pcs M3*5 screws
- 2 pcs M2.5 nuts
- 1 pcs Manual
Documentation
Versandgewicht: | 0,23 Kg |