Edatec GW1303S-868M SX1303 LoRa Module EU (868 MHz)

Overview

ED-GW1303S LoRaWAN gateway module support both US915 and EU868 frequency bands, enable you to have a wide-range of LoRaWAN frequency plans options to choose including EU868, US915, AS923, AS920, AU915, KR920, and IN865.

ED-GW1303S is designed for M2M and IoT applications and can be widely applied in LPWAN gateway supported scenarios. It would be a perfect choice for you to significantly reduce the technical difficulties and time-consumption when developing the LoRa gateway devices, including LoRaWAN gateway, miner hotspots, etc.

Pinout Interfaces

• Power Supply - This module must be supplied through the VCC_3V3 pins by a DC power
• SPI Interfaces - It's SPI slave side and gives access to the configuration registers of SX1303
• GPS-PPS - This module includes the GPS_PPS input for received packets time-stamped and Fine timestamp
• RESET - It includes the RESET active-high input signal to reset the radio operations as specifiedby the SX1303 Specification
• Antenna RF Interface - The module have one RF interface over a standard UFL connector, The RF port supports both Tx and Rx, providing the antenna interface

Supporting Frequencies

Environmental Requirements

Ordering Code