Overview
ED-GW1303S LoRaWAN gateway module support both US915 and EU868 frequency bands, enable you to have a wide-range of LoRaWAN frequency plans options to choose including EU868, US915, AS923, AS920, AU915, KR920, and IN865.
ED-GW1303S is designed for M2M and IoT applications and can be widely applied in LPWAN gateway supported scenarios. It would be a perfect choice for you to significantly reduce the technical difficulties and time-consumption when developing the LoRa gateway devices, including LoRaWAN gateway, miner hotspots, etc.
Pinout Interfaces
-
Power Supply - This module must be supplied through the VCC_3V3 pins by a DC power
-
SPI Interfaces - It's SPI slave side and gives access to the configuration registers of SX1303
-
GPS-PPS - This module includes the GPS_PPS input for received packets time-stamped and Fine timestamp
-
RESET - It includes the RESET active-high input signal to reset the radio operations as specifiedby the SX1303 Specification
-
Antenna RF Interface - The module have one RF interface over a standard UFL connector, The RF port supports both Tx and Rx, providing the antenna interface
Supporting Frequencies
| Region |
Frequency(MHz) |
| Europe |
EU868 |
| North America |
US915 |
| Asia |
AS923 |
| Australia |
AU915 |
| Korea |
KR920 |
| India |
IN865 |
Environmental Requirements
| Parameter |
Min |
Type |
Max |
| Operating Temperature |
-40°C |
25°C |
85°C |
Ordering Code
| Code |
Product Description |
| ED-GW1303S-915M |
US915 |
| ED-GW1303S-868M |
EU868 |
Datasheet (EN)
