Arducam B0164 18MP AR1820HS Camera for Raspberry Pi, M12 S-Mount

Item Description:

Arducam AR1820HS camera breakout incorporates ON Semiconductor 1/2.3-inch CMOS active-pixel digital imaging sensor AR1820HS with 1.25um x 1.25um A-PixHS™ BSI Pixel . It can support 18-megapixel (4912H x 3684V) digital still images at 24 fps and a 1080p plus additional 27 percent pixels for electronic image stabilization (2448H x 1378V) in digital video mode at 60 fps and 1080p120 fps.

Note:

The camera module is the RAW sensor which doesn"¯t include ISP (Image Signal Processing) on the image sensor chip, so it only supports manual exposure, manual white balance, manual gain settings.

Features:

Optical format	1/2.3-inch (4:3)
Active pixels	4912H x 3684V
Pixel size	1.25um x 1.25um
Color filter array	RGB Bayer pattern
ADC resolution	12-bit, on-chip
Responsivity	0.62 V/lux-sec (545 nm)
Dynamic range	65.8 dB
SNRMAX	36.3 dB
Output Interface	4-Lane MIPI
Frame Rate	4:3 – 18 Mp full resolution at 15 fps (MIPI-4L) 16:9 – 14 Mp at 20 fps (MIPI-4L) 16:9 – 8 Mp at 30 fps (MIPI-4L) 16:9 – Full HD + 27.5%EIS at 60 fps 16:9 – Full HD at 120 fps
Lens	Default: low distorion M12 lens (Part Number: M27280M07S)
IR Sensitive	build-in 650nm IR filter, visible light only

Application:

• Digital video cameras
• Digital still cameras
• Industrial camera
• Medical camera
• Microscopy camera
• UAV camera

Package Including:

• 1 pcs Arducam CMOS AR1820HS 1/2.3-inch 18MP Color Camera Module
• 1 pcs 80mm 22pin FPC cable
• 1 pcs 150mm 15pin to 22pin FPC cable

Additional Resources: 

• User Guide – Arducam 18MP AR1820HS Color Pi Camera
• Sensor Datasheet – AR1820HS
• Blog – Arducam USB Camera
• Lens Options – Arducam M12 Mount Lens Kit, Arducam Low Distortion M12 Mount Lens Kit