Bambu Lab PETG-CF Refill Filament

Artno.: BL6-631100-P
Manufacturers: Bambu Lab

Carbon Fiber Reinforced PETG, PETG-CF Filament, Diameter 1.75mm +/- 0.03mm, Less Clumping and Stringing, Premium Print Surface, Improved Mechanical Properties and High Flexibility, AMS Compatible, RFID

Variant: 32,90 €31100 Black

from

19,70 €

incl. 19% VAT

(27,65 € excl. VAT)

plus

On stock (short supply)

Please select a model.

Description
Product Reviews

Bambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improves printing quality by reducing nozzle clogging and clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny appearance. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.

Printing Tips

Bambu PETG-CF needs proper drying before printing. Drying conditions: 65℃ for 8 hours. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details, please refer to: Filament drying instructions on Bambu Lab Wiki.
To achieve stronger Z-adhesion, please set a higher infill density and do not use an open-frame printer or set fan percentages too high to avoid overcooling.
To achieve shinier looks, set lower speeds and relatively higher temperatures.
Feel free to reuse your Bambu Reusable Spool. Bambu Lab has designed the entire filament feeding system around a reusable spool design and achieved at least 20% less plastic waste in filament consumption.
All printing parameters are embedded in RFID, which can be read through Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.
Although PETG-CF is compatible with AMS, it's not ideal for AMS Lite.

Model Overview

Color	Hex Code	Display
Brick Red	#9F332A
Violet Purple	#583061
Indigo Blue	#324585
Malachite Green	#16B08E
Black	#000000
Titan Gray	#565656

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	65 ℃, 8 h
Printing and Keeping, Container's Humidity	<20% RH (Sealed, with Desiccant)
Nozzle Temperature	240 - 270 ℃
Bed Temperature (with Glue)	65 - 75 ℃
Printing Speed	< 200 mm/s
Physical Properties
Density	1.25 g/cm³
Vicat Softening Temperature	85 ℃
Heat Deflection Temperature	74 ℃
Melting Temperature	225 ℃
Melt Index	19.3 ± 2.4 g/10 min
Mechanical Properties
Tensile Strength	35 ± 5 MPa
Breaking Elongation Rate	10.4 ± 0.6 %
Bending Modulus	2910 ± 260 MPa
Bending Strength	70 ± 5 MPa
Impact Strength	41.2 ± 2.6 kJ/m²

Extended Specifications

Package Contents

Filament x 1 & Desiccant x 1
Package x 1
Filament Label x 1

Features

Less clumping and stringing

Bambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.

Premium print surface

Carbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.

Carbon Fiber Texture

Carbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.

Shiny Finish

Different from PLA-CF's matte finish, PETG-CF offers a shiny finish and thus one more choice.

Strong XY Performance

The addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.

High Flexibility

The addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.

More Features

There are no reviews yet.