| Product |
Formlabs Form Studio 1 |
| Device type |
Desktop resin 3D printer |
| Print technology |
SLA – masked stereolithography (MSLA) |
| Print engine |
Low Force Display (LFD) |
| Key components |
Backlight unit, Light Processing Unit Studio 1 (LPU S1), Release Texture V2, flexible film resin tank, intelligent control systems, automatic resin handling |
| Light source |
28 LEDs, plano-convex lens array, integrated air cooling |
| Wavelength |
405 nm |
| Light intensity |
6 mW/cm² at the cure plane |
| Pixel size |
35 µm, anti-aliasing for subpixel resolution |
| Build volume (W × D × H) |
20.0 × 12.5 × 23.5 cm (5.9 L) |
| Build area |
250 cm² |
| Max. part length |
29.1 cm |
| Layer thickness |
25–250 µm |
| Max. print speed |
Up to 130 mm/h (Alpha Fast Resin) |
| Typical print time |
Most prints under 2 h (53 mm print height, 100 µm layer height) |
| Dimensional tolerances (XY) |
1–30 mm: ±0.5%; 31–80 mm: ±0.2%; 81–150 mm: ±0.03% (lower limit ±0.08 mm each) |
| Resin heating |
Up to 45 °C |
| Control systems |
Five intelligent control systems (incl. resin temperature, resin level, print forces) |
| Calibration |
Factory, 28 points incl. test print |
| Interface |
7-inch touchscreen, UI in 7 languages |
| Connectivity |
Wi-Fi, Ethernet, USB-C 2.0 |
| Camera |
Built-in, for remote monitoring and time-lapses; can be disabled |
| Materials |
9 validated Formlabs resins; other resins via Open Material Mode (included) |
| Safety |
Sealed print chamber, spill-resistant resin tanks, vent port for optional VOC Extractor; UL GREENGUARD Gold with VOC Extractor and Alpha Resins |
| Software |
PreForm, Formlabs Dashboard, Form Mobile app; remote printing |
| Housing colors |
Graphite; Aqua, Violet, Teal (Founders Edition, limited) |
