Siglent SDG3162X Waveform Generator

Artno.: SL3-131620
Manufacturers: Siglent

Arbitrary waveform generator, 2 Channels,160 MHz Bandwidth, 1.2 GSa/s (2X Interpolation) Sample Rate, 16-bit Resolution, 7" Touch Screen Display,USB Host / USB Device / LAN / GPIB (optional) Interface, Web Interface, Touch Screen

from

1.184,00 €

incl. 19% VAT

(994,96 € excl. VAT)

Out of stock

Configure + Buy

Software Options

Siglent SDG-3000X-40MPTS 40 Mpts Waveform Memory

Siglent SDG-3000X-40MPTS 40 Mpts Waveform Memory: 355,00 € Item details

Quantity: 1

Siglent SDG-3000X-IQ IQ Signal Generator Function

Siglent SDG-3000X-IQ IQ Signal Generator Function: 570,00 € Item details

Quantity: 1

Accesories

Siglent ATT-20dB Attenuator 20dB, BNC, 50 Ohm, 1W, 4 GHz

Siglent ATT-20dB Attenuator 20dB, BNC, 50 Ohm, 1W, 4 GHz: Siglent ATT-20 20dB Attenuator Can be used as external over- input level protection for the SSA3000X spectrum analyzers (Requires N(m) to BNC(f) adapter or coax cable). Also used to decrease the output voltage level from a SDG function generator.
61,00 € Item details

Quantity: 1

Siglent USB-GPIB Adaptor: USB-GPIB converter, compatible with all Siglent devices with USB host interface
146,00 € Item details

Quantity: 1

Siglent SDG-BNC Coaxial Cable BNC-Male to BNC-Male, 50...

Siglent SDG-BNC Coaxial Cable BNC-Male to BNC-Male, 50 Ohm, 100cm: 0,00 € Item details

Quantity: 1

Siglent SPA1010 Signal Amplifier - Item currently out of stock: Signal amplifier for Siglent SDG signal generators, output power up to 10W
427,00 € Item details

Quantity: 1

Your configuration

incl. 19% VAT

(994,96 € excl. VAT)

The SDG3000X series dual-channel function/arbitrary waveform generator has a maximum bandwidth of 200MHz, an excellent sampling system specifications of 1.2 GSa/s sampling rate and 16-bit vertical resolution. Based on the traditional DDS technology, it adopts the innovative TrueArb and EasyPulse technologies, which overcome the inherent defects of DDS technology in outputting arbitrary waves and square waves/pulses, and can provide users with high-fidelity, low-jitter signals. In addition, the SDG3000X also provides PRBS pattern generation, sequence, dual pulse, and vector signal output functions to meet a wider range of application needs.

Key Features

Dual channels, maximum output frequency 200 MHz, maximum output amplitude 20 Vpp
1.2 GSa/s sampling rate, 16-bit vertical resolution
Using TrueArb technology, arbitrary waveforms can be output point by point. Under the premise of not losing waveform details, low-jitter waveforms can be output at a sampling rate of 10 mSa/s ~ 600 MSa/s
Supports sequence wave playback function, with a maximum waveform memory of 40 Mpts per channel
Using EasyPulse technology, it can output low-jitter square waves/pulses, and the pulse wave can achieve fine adjustment of pulse width, rising/falling edges, with extremely high adjustment resolution and adjustment range
Supports dual pulse output function, which can be used to measure the switching parameters of power devices and evaluate their dynamic characteristics
Supports PRBS up to 120 Mbps
Rich analog and digital modulation functions: AM, DSB-SC, FM, PM, FSK, ASK, PSK and PWM
Sweep and Burst functions
Harmonic function
Waveform Combining function
High precision Frequency Counter
196 built-in arbitrary waveforms
Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11); optional GPIB
Built-in WebServer supports instrument control via web browser
7-inch display touch screen

Model Overview

	SDG3082X	SDG3162X	SDG3202X
Max output frequency	80 MHz	160 MHz	200 MHz
Channels	2
Sample Rate	1.2 GSa/s (2X Interpolation)
Vertical Resolution	16-bit
Waveform Length	20 Mpts/ch (40 Mpts/ch Optional) Support sequence
Vector signal (Optional)	50 MS/s max symbol rate; Includes modulation modes such as ASK, PSK, FSK and QAM. SigIQPro software provides vector signal creation and editing
Max Amplitude	&pm;10 V
Display	7-inch TFT LCD with capacitive touch screen, 1024 x 600
Interfaces	USB Host, USB Device, LAN, optional GPIB

Package Contents

Device
Power Cord
USB Cable
BNC Cable
Quick Start Guide
Calibration Certificate

Features

Innovative EasyPulse Technology

When a Square/Pulse waveform is generated by DDS, there will be a one-clock-jitter if the sampling rate is not an integer-related multiple of the output frequency. EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Square/Pulse waveforms.

Powerful sequence playback function

Provides flexible sequence playback function to easily cope with various scenario tests. The maximum waveform storage depth of each channel is 40 Mpts.

Easily set the number of cycle times for each waveform and the order of waveform playback. It supports up to 1024 segments. During playback, it can also indicate the segment currently being played, allowing you to control the test. Five operating modes: continuous, triggered, burst, single, and advanced. The advanced operating mode allows you to set the trigger mode for each segment. Four trigger sources are available: "Auto", "External", "Manual" and "Timer".

Built-in multi-pulse function

Built-in dual pulse output function, combined with siglent's oscilloscope, can quickly measure the switching parameters and dynamic characteristics of power devices without the need for host computer software.

Supports up to 30 pulses, and can set each pulse width and pulse interval. Four trigger sources are available: "Internal", "External", "Manual" and "Timer".

Customizable polynomial PRBS pattern output

Provides PRBS3 - PRBS32 multiple pattern outputs, with a maximum bit rate of up to 120 Mbps. In addition to outputting single-ended signals, the two channels can also be set to differential output. In addition to using the built-in PRBS generator polynomial, you can also customize the PRBS generator polynomial to make the test more flexible.

Vector signal output

SDG3000X supports baseband or IF signals and can generate IQ signals of commonly used modulation types such as ASK, FSK, PSK, QAM, etc. SDG3000X can achieve excellent EVM performance at any symbol rate in the range of 250 Symb/s ~ 50 MSymb/s. The built-in digital orthogonal modulator can modulate the IQ signal to any frequency in the range of 200 MHz.

Modulation

Rich modulation functions, supporting commonly used AM/DSB-SC/ FM/ PM/ ASK/ FSK/ PSK/ PWM modulation methods. Two modulation sources are available: internal and external.

Burst

Supports two Burst modes: N cycle and Gating. Three trigger sources are available: internal, external and manual.

Sweep

Supports three sweep modes: frequency, amplitude, and frequency and amplitude, making it easy to implement frequency sweep and amplitude sweep tests. Supports three sweep type: linear, log and step, and three sweep directions of up, down and up_down. Three trigger sources are available: internal, external and manual.

Counter

When the counter is in frequency counter mode, it can be used to measure the frequency, period, and duty cycle of a signal. The measurement range is 0.1 Hz - 200 MHz

When operating in totalizer mode, the specified trigger events can be counted.

Built-in WebServer

Supports instrument control through a web browser, allowing testing tasks to be completed remotely.

More Features

There are no reviews yet.

Contact data

E-Mail

I have read and accepted the privacy statement. ()