Bambu Lab FAC233 H2D TPU High-Flow Kit

Artno.: BL9-611331
GTIN: 6937285511331
HAN: FAC233
Manufacturers: Bambu Lab

Reliable High-Speed TPU Printing (save up to 30% Print Time), Specially Tuned for Bambu TPU Filaments, Easy Installation, The H2D TPU High-Flow Kit includes 0.4 mm and 0.6 mm TPU High-Flow hotends and the required components for installation

42,90 €

incl. 19% VAT

(36,05 € excl. VAT)

plus

Orderable
Delivery time: 3 - 4 weeks (DE - int. shipments may differ)

Description
Product Reviews

Important Notice Before Purchase

Limitations: After installing the TPU hotend, the filament cutter cannot be installed or used. The right nozzle also does not support automatic filament changing, feeding, or retracting.
Only flexible filaments: The TPU hotend has a special inner coating. Printing hard filaments (such as PLA, PETG, or TPU for AMS) is prohibited, as it may damage the coating.
Position limitation: The TPU hotend can only be installed on the right nozzle. Installing it on the left may cause malfunction.
Installation guide: Please read the official H2D TPU High-Flow Kit installation guide on Bambu Lab Wiki before purchasing.
Model compatibility: Only supported on H2D and H2D Pro. Not compatible with other models.

Reliable High-Speed TPU Printing

The specially designed hotend reduces extrusion resistance and extends the melting zone, allowing faster and more stable TPU printing. When printing 90A TPU, it can deliver up to 100% higher flow rate and reduce print time by around 30%.

Specially Tuned for Bambu TPU Filaments

Print parameters are optimized for all Bambu TPU filaments when used with the TPU High-Flow Kit. No manual adjustments are needed.

Easy Installation

Installation takes only a few minutes. Remove the front cover, take out the filament cutter, and insert the High-Flow hotend.

Comparison of Different Nozzle Sizes

85A

0.4 mm Standard: Not Compatible
0.6 mm Standard: 2.2 mm³/s
0.4 mm High-Flow: 2.5 mm³/s
0.6 mm High-Flow: 4.8 mm³/s

90A

0.4 mm Standard: 2.8 mm³/s
0.6 mm Standard: 2.8 mm³/s
0.4 mm High-Flow: 5.6 mm³/s
0.6 mm High-Flow: 5.6 mm³/s

95A HF

0.4 mm Standard: 12 mm³/s
0.6 mm Standard: 12 mm³/s
0.4 mm High-Flow: 16 mm³/s
0.6 mm High-Flow: 16 mm³/s

Note: Speed improvements apply only to Bambu TPU 85A, 90A, and 95A HF.

Filament Compatibility

Bambu TPU 85A
Bambu TPU 90A
Bambu TPU 95A
Bambu TPU 95A HF
Generic TPU

Installation Guide

Refer to the installation guide for the H2D TPU High-Flow Kit on Bambu Lab Wiki.

In the Box

0.4 mm High-Flow TPU Hotend (1)
0.6 mm High-Flow TPU Hotend (1)
TPU High-Flow Front Cover Guide (1)
TPU Hotend Cover (1)
Hotend Cover (1)
M2×5 Screws (2)

There are no reviews yet.