Bambu Lab FAP041 Cool Plate SuperTack Pro H2C

Artno.: BL9-410372
GTIN: 6937285510372
HAN: FAP041
Manufacturers: Bambu Lab

Ultra-strong PLA/PETG adhesion at low bed temps, reduces warping, tolerates uneven surfaces, durable Pro coating

Variant: 60,90 €H2D/H2D Pro Out of stock

56,90 €H2C

56,90 €

incl. 19% VAT

(47,82 € excl. VAT)

soon in stock
Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Description
Product Reviews

Say goodbye to print failures with super reliable surface adhesion! SuperTack Pro coating provides ultra-strong adhesion to PLA and PETG filaments, even at lower heatbed temperatures. It enhances printing success by eliminating adhesion issues, reduces warping when printing large objects and works well with bad shape surface.

SuperTack Pro vs SuperTack

The "Pro" variant builds on the standard SuperTack with a few performance upgrades:

Longer lifespan: Around 25% longer durable sticky performance before noticeable wear
Better scratch resistance: More robust surface makes it slightly harder to damage
Lower recommended bed temperature: Can offer reliable adhesion at even cooler beds (e.g., about 40 °C for PLA vs about 45 °C on standard SuperTack)
Smoother part removal when cooled: Slightly easier to pop parts off once the bed cools down

Key features

Reliable surface adhesion
Durable coating for long-lasting performance
Natural texture seamlessly hides the bottom surface
Designed for PLA and PETG

Materials	Heatbed temperature with SuperTack	Heatbed temperature with SuperTack Pro
PLA	45°C	70°C
PETG	45°C	60°C

Considerations

Use the scraper included with your printer to gently lift the print, then carefully pry it off. Warning: The surface is soft, so be careful when using the scraper. If the print is sticking too tightly, heat the plate on the heatbed to 50°C to assist with removal.
The H2C print bed is slightly smaller than the H2D because the Vortek hotend rack occupies additional space. Tip: Ensure you select the correct model when purchasing.
Do NOT print with TPU filament, as it will damage the build plate.
Increasing the heatbed temperature enhances adhesion. Adjust the temperature based on your print requirements for the best results.
For X1, P1, and A1 printers: before auto-leveling, rub the nozzle in the special wiping area of the build plate to remove residual material. The coating in this area will wear over time. This is normal and does not affect print quality or nozzle lifetime.
Bambu Cool Plate SuperTack Pro is a consumable part and will degrade over time. The warranty covers manufacturing defects only, not cosmetic damage like scratches, dents, or cracks. Only defective sheets upon arrival are covered by the warranty.
SuperTack Pro provides strong adhesion without adhesive or frequent cleaning. You can clean it with water and dish soap if it becomes dirty. Do NOT use organic solvents (especially acetone), as they will damage the surface.
Bambu PLA Silk+ works well on SuperTack Pro thanks to its improved layer adhesion. Other PLA Silk materials may stick too strongly and could damage prints. Recommendation: Use Bambu PLA Silk+ or, for third-party PLA Silk, select the Generic PLA Silk preset in Bambu Studio and test for compatibility.

Model Overview

Material	Specially Designed Coating Spring Steel Plate
Thickness	Coating - 0.05mm Steel Plate - 0.4mm
Surface Temperature Resistance	Up to 120°
Usable Print Size	X1C/P1P/P1S/A1/P2S - 256 x 256mm H2D/H2S - 350 x 320mm H2C - 330 x 320mm
Packaging Weight	0.22 kg 0.48 kg 0.46 kg

Features

Eliminates Adhesion Issues

Reduces Warping when Printing Large Objects

The Surface is in Bad Shape? No Problem!

Long Lasting Performance

The SuperTack coating is durable, retaining its sticky properties even after extensive use. This results in a longer lifespan for the printing plate, reducing printing costs (less than 20% adhesion loss after 300 prints) and lowering carbon emissions. (*The test data was produced using PLA Basic filament and completed on the A1 3D Printer.)

Smooth & Natural Surface Finish

The SuperTack coating can impart a smooth and matte texture to the bottom surface of the printed object, better blend-in with other surfaces.

Energy Saving

The SuperTack coating requires only an extremely low heatbed temperature to ensure that printed objects adhere securely. This means you can save a significant amount of energy during heating, leading to lower power bills and, more importantly, helping to protect our planet.

More Features

There are no reviews yet.