Bambu Lab Support Filament for PLA/PETG on Spool 65102 - Nature

Artno.: BL5-965102
GTIN: 6975337038092
HAN: S05-C0-1.75-500-SPL
Manufacturers: Bambu Lab

Bambu Lab Support for PLA/PETG is a breakaway support filament for support interfaces in PLA and PETG prints. It makes support removal easier and improves surface quality on supported areas.

38,90 €

incl. 19% VAT

(32,69 € excl. VAT)

plus

10+ On stock
Delivery time: 1 - 3 business days (DE - int. shipments may differ)

BAMBU LAB SUPPORT FOR PLA/PETG

Bambu Lab Support for PLA/PETG

Breakaway support filament for PLA and PETG prints – designed for clean support interfaces, easy removal and improved surface quality on supported areas.

Clean support surfaces for PLA and PETG

Bambu Lab Support for PLA/PETG is a dedicated support material for prints made from PLA or PETG. It is not used as a normal model material, but specifically for the contact interface between support and part. This makes support structures easier to remove and helps keep surfaces cleaner on overhangs and complex areas.

Support interface instead of full support material

The material is intended for support or raft interface layers. The main support structure can still be printed from PLA or PETG, while Support for PLA/PETG is only used at the contact zone to the part. This saves support material, improves surface finish and reduces the risk of damaging details while removing supports.

For PLA & PETG

Breakaway support

Interface only

AMS compatible

Tool-free removal

0.5 kg spool

190–220 °C

Recommended nozzle temperature

35–60 °C

Recommended bed temperature with glue

<100 mm/s

Recommended print speed

0.5 kg

Filament with High Temperature Reusable Spool

SUPPORT INTERFACE

Less post-processing on supported surfaces

On complex models, overhangs or flat underside areas, normal support material can leave visible marks. Support for PLA/PETG is used exactly where support and model meet. This creates smoother contact areas, makes supports easier to remove and reduces the risk of broken edges or damaged details.

Support interface

PLA

PETG

Complex geometries

Clean undersides

SLICER WORKFLOW

Use as Support/Raft Interface in the slicer

In Bambu Studio or compatible slicers, select the material as “Support for PLA/PETG” for “Support/Raft Interface”. It is not intended for printing the complete support structure or a standalone model. For tree supports, the material should not be used for the support base, but only for the contact interface.

Highlights

Easy removal

Specially formulated so support interfaces can be removed more easily from the model.

For PLA and PETG

One support material for both common materials without switching support types.

Smooth contact area

Helps create cleaner surfaces on supported areas and fine details.

AMS compatible

Usable with AMS and AMS lite, making it ideal for automated multi-material prints.

RFID parameters

Compatible AMS systems can read the embedded printing parameters automatically.

For complex models

Ideal for overhangs, cavities, fine details and parts with visible undersides.

Technical Data

Product	Bambu Lab Support for PLA/PETG
Material Type	Breakaway support filament for support interfaces
Use	Only for Support/Raft Interface, not as standalone model material
Compatible Model Materials	PLA and PETG
Filament Diameter	1.75 mm ±0.05 mm
Spool Size	0.5 kg filament with High Temperature Reusable Spool
Colors	Nature / transparent appearance and Black depending on variant
Nozzle Temperature	190–220 °C
Bed Temperature	35–60 °C with glue
Print Speed	<100 mm/s recommended
Hotend Compatibility	All nozzle sizes and nozzle materials according to Bambu parameter table
Build Plate	Cool Plate SuperTack, Smooth PEI Plate or Textured PEI Plate recommended
Solubility	Water-insoluble; mechanically removable breakaway support material
Drying	75 °C for 8 h if needed, for example after moisture exposure or brittle filament
Storage / Print Environment	Below 20% RH recommended, sealed with desiccant
Density	1.28 g/cm³
Melting Temperature	185 °C
Melt Index	14.3 ±1.2 g/10 min

Printing Notes

For best results, Support for PLA/PETG should only be used as a support or raft interface material. The support base can remain printed from the main model material. When using tree supports, do not use the support material for the support base. For clean contact areas, interface spacing and Z distance can be set very tightly, while final tuning depends on the model, material and desired removability.

Interface only

Not for model parts

Not for tree support base

PLA compatible

PETG compatible

Store dry

Typical Applications

Bambu Support for PLA/PETG is suitable for models with difficult overhangs, cavities, internal geometries or visible undersides. It is especially useful when the supported contact area remains visible or should require as little post-processing as possible.

Overhangs

Visible undersides

Complex geometries

PLA models

PETG models

Prototypes

Design parts

Multi-material printing

For better support surfaces with PLA and PETG

Support for PLA/PETG is especially useful when normal supports leave too many visible marks or when support removal should be cleaner and safer.

Usage note

This material is not water-soluble and does not replace PVA/BVOH for soluble support structures. It is a breakaway interface material for PLA and PETG. For other model materials such as ABS, ASA, PA or PET-CF, choose a suitable dedicated support material.

BAMBU LAB AT WELECTRON

Welectron provides advice, fast shipping and suitable support for Bambu Lab 3D printers, filaments, AMS systems, spare parts, maintenance and accessories.

Shipping weight:	0,90 kg

There are no reviews yet.