Prusa PA Nylon Powder-coated Print Sheet

Prusa PA Nylon Powder-coated Print Sheet

Artno.: PS9-249920-P
Manufacturers: Prusa Research

The Prusa PA Nylon Powder-coated Print Sheet is a double-sided special print sheet for nylon and polyamide filaments. It improves adhesion for PA prints and is cleaned only with water.

Variant

from

62,99 €

incl. 19% VAT

(52,93 € excl. VAT)

Orderable

Please select a model.

Description
Product Reviews

PRUSA PA NYLON PRINT SHEET

Prusa PA Nylon Powder-coated Print Sheet

Double-sided powder-coated PA Nylon spring steel sheet for technical prints with polyamide and nylon filaments – with a special surface for improved adhesion, a matte part bottom finish and flexible part removal.

Special print sheet for nylon and polyamide materials

The Prusa PA Nylon Powder-coated Print Sheet is specifically designed for polyamide-based filaments. Nylon and PA materials are demanding in 3D printing because they often tend to warp heavily and do not reliably adhere to standard PEI, satin or textured print sheets. The PA Nylon surface improves adhesion for many polyamides and is especially suitable for Prusament PA11 Carbon Fiber Black.

More adhesion for technical PA prints

Polyamides offer high toughness, heat resistance and mechanical performance, but they place high demands on the print surface, filament drying and ambient printing conditions. The PA Nylon sheet has a dedicated surface that improves adhesion and reduces the need for glue stick or other adhesion aids when used with suitable PA materials.

For polyamides

Ideal for PA11-CF

No glue stick

Clean only with water

Double-sided

Matte surface

Special surface for polyamide / nylon

PA11-CF

Especially suitable for Prusament PA11 Carbon Fiber Black

Water

Clean only with water, no IPA or acetone

XL variant for Original Prusa XL

FOR NYLON WORKFLOWS

More control with difficult PA filaments

Nylon and polyamide filaments are commonly used for functional parts where toughness, heat resistance and mechanical performance matter. At the same time, these materials can warp significantly and detach from unsuitable print surfaces. The PA Nylon sheet is designed for this use case and improves adhesion compared with standard surfaces.

Nylon

PA11-CF

Technical parts

Functional parts

VARIANT NOTE

Choose the correct PA Nylon sheet for your printer model

This description is written for Prusa PA Nylon Powder-coated Print Sheets. The exact compatibility depends on the selected variant. The XL version is intended for the Original Prusa XL. Other versions, for example for CORE One / MK format or HT90, have their own dimensions and must not automatically be considered interchangeable.

Highlights

Made for polyamides

The surface is specifically tuned for PA and nylon filaments.

Better for PA11-CF

Especially useful for Prusament PA11 Carbon Fiber Black and similar PA materials.

No glue stick required

According to Prusa, no glue stick is required for suitable materials.

Clean only with water

The surface must not be treated with IPA, acetone or alcohol-based cleaners.

Double-sided use

Both sides of the flexible spring steel sheet can be used repeatedly.

Matte surface

The surface leaves a matte, lightly textured bottom finish on printed parts.

Variants and Compatibility

XL PA Nylon Print Sheet	Variant for Original Prusa XL. Designed for the XL heatbed format.
CORE One / MK format	Dedicated variant for compatible CORE One and MK heatbed formats. Not automatically suitable for XL or HT90.
HT90 PA Nylon Print Sheet	Dedicated variant for Prusa Pro HT90. Designed for the HT90 heatbed format.

Technical Data

Product	Prusa PA Nylon Powder-coated Print Sheet
Product Type	Print sheet / flexible spring steel sheet
Surface	Powder-coated PA Nylon surface, matte and lightly textured
Base Material	Flexible spring steel sheet with special PA Nylon print surface
Use	Double-sided use
Main Materials	Polyamide-based filaments / nylon, especially Prusament PA11 Carbon Fiber Black
Suitable Materials	Many polyamides and PETG according to Prusa
Not Ideal For	Other materials may detach during printing and should usually be printed on suitable standard PEI sheets.
Compatible Printers	Depending on variant for Original Prusa XL, Prusa Pro HT90 or CORE One / MK format
Cleaning	Clean only with water; for greasy areas use water with a drop of dishwashing detergent
Do Not Use	No IPA, no acetone, no alcohol-based cleaners, no metal spatulas, do not put in a freezer
Note	Print sheets are consumable parts; gloss changes, visible Z-probing points or wear marks may appear and, according to Prusa, do not necessarily affect function.

Typical Applications

The PA Nylon print sheet is suitable for technical prints with polyamide filaments where standard print surfaces do not provide enough adhesion. Typical applications include durable functional parts, jigs, housings, brackets, technical prototypes and PA11-CF components. Since polyamides are highly hygroscopic and can warp, dry filament, suitable print profiles and a controlled print workflow are especially important.

PA prints

Nylon

PA11-CF

Functional parts

Technical prototypes

Jigs

Brackets

Engineering parts

Care and everyday use

The PA Nylon surface is more sensitive to cleaning agents than classic PEI surfaces. It should therefore be cleaned only with water. For greasy areas, water with a drop of dishwashing detergent can be used. IPA, acetone, window cleaners and other alcohol-based cleaners must not be used because they can quickly deteriorate the surface.

Specialized surface for demanding PA prints

The PA Nylon sheet is not a universal everyday sheet for every material, but a dedicated solution for nylon and polyamide workflows. For PLA, ASA, ABS or other standard materials, smooth, satin or textured PEI sheets are usually the better choice depending on the material.

Cleaning and material note

This description is written generally for Prusa PA Nylon Powder-coated Print Sheets. Always select the variant that matches the printer model. The sheet should only be used with suitable polyamide materials and PETG. Other materials may detach during printing. When switching between different print sheets, first-layer or Z-offset recalibration may be required.

PRUSA AT WELECTRON

Welectron provides advice, fast shipping and suitable support for Prusa 3D printers, print sheets, spare parts, filaments, maintenance and accessories.

There are no reviews yet.