Bambu Lab E1 Air Purifier

Artno.: BL9-516565
GTIN: 6937285516565
HAN: SP002-EU
Manufacturers: Bambu Lab

Bambu Lab E1 Air Purifier for 3D printers For H3C, H2S, H2D, P2S (firmware update required) Three-stage filter, up to 99.97% at 0.3 µm 40 mm activated carbon (0.45 kg), Quiet Mode from 38 dB Auto and manual mode, control from the printer Incl. exhaust hose and Bambu Bus cable

199,00 €

incl. 19% VAT

(167,23 € excl. VAT)

Orderable
Delivery time: 3 - 4 weeks (DE - int. shipments may differ)

Description
Product Reviews

Bambu Lab Accessory

Bambu Lab E1 Air Purifier

The air purifier for Bambu Lab 3D printers: connected directly to the print chamber, it filters particles and odours right where they are generated.

At a Glance

Fits

Bambu Lab H3C, H2S, H2D and P2S (full features after firmware update; 3D printing only on H2S and H2D)

Filaments

Recommended for PLA, PETG, TPU; mitigated for ABS, ASA, PC, PA (Enhanced Filter recommended)

Package Contents

E1 Air Purifier, exhaust hose, power cord, Bambu Bus cable 6-pin, exhaust connectors, O-ring

Clean Air Around the Printer

3D printing produces fine particles and odours that spread through the room without extraction. The E1 Air Purifier was developed specifically for 3D printers and connects directly to the print chamber. This captures the exhaust air before it enters the room and passes it through a multi-stage filter.

99.97%

Filtration efficiency at 0.3 µm

38 dB

Noise level in Quiet Mode

3 Stages

Composite filter

0.45 kg

Activated carbon in the filter

Main Benefit

Works in Sync with the Printer

Via the Bambu Bus cable, the E1 becomes part of the printer. After a firmware update, all features are available on the H3C, H2S, H2D and P2S: auto and manual mode as well as control directly from the printer. The purifier runs exactly when it is needed, without you having to operate it separately.

Directly at the Print Chamber

Auto and Manual Mode

Control from the Printer

Bambu Bus Connection

Filter

Three Filter Stages in Sequence

The exhaust air first passes through a pre-filter made of filter cotton for coarser particles. A HEPA layer then captures fine particles. Finally, a 40 mm activated carbon layer made of high-iodine coconut shell carbon adsorbs odour molecules.

Technical Data

Filter Type	Three-layer composite filter: pre-filter, HEPA layer, activated carbon layer
Filtration Efficiency	Up to 99.97% at 0.3 µm (HEPA layer ≥ 99.97%)
Activated Carbon	40 mm layer, 0.45 kg high-iodine coconut shell carbon
Noise Level	From 38 dB in Quiet Mode
Connection	Bambu Bus cable, 6-pin
Operating Modes	Auto, manual
Compatibility	Bambu Lab H3C, H2S, H2D, P2S (firmware update required)
Recommended Filaments	PLA, PETG, TPU
Mitigated	ABS, ASA, PC, PA (Enhanced Filter recommended)
Package Contents	E1 Air Purifier, exhaust hose, power cord, Bambu Bus cable 6-pin, exhaust connectors, O-ring

Filter and Maintenance

For frequent use, Bambu Lab recommends replacing the filter monthly; for less frequent use, at the latest after three months. If airflow drops noticeably or an odour is detectable at the outlet, a replacement is due. Check the exhaust hose weekly for a secure fit and clean the air inlet and outlet monthly. For engineering filaments such as ABS, ASA, PC and PA, Bambu Lab offers a separately available Enhanced Filter.

Typical Applications

The E1 is suited wherever Bambu Lab 3D printers are placed in living, office or classroom spaces and the exhaust air cannot be vented outside.

Office

Home Workspace

Schools and Labs

Makerspace

Workshop

Important Note

The E1 is intended exclusively for filtering exhaust air from Bambu Lab 3D printers and is not suitable for laser exhaust. It does not filter carbon monoxide (CO) or radon and is not a safety device for fires or chemical incidents.

BAMBU LAB AT WELECTRON

Welectron provides advice, fast shipping and suitable support for Bambu Lab 3D printers, accessories, spare parts and filaments.

Shipping weight:	4,14 kg

There are no reviews yet.