Bambu Lab Support PLA Filament on Spool

Artno.: BL5-965100-P
Manufacturers: Bambu Lab

Bambu Lab Support for PLA is an easy-removal breakaway support / interface filament for PLA prints. It provides clean support contact surfaces, smooth underside areas and less post-processing for complex PLA models. Important: it is mechanically removable and not intended as a water-soluble support material. If soluble support is required, we recommend Bambu Lab PVA.

Variant

from

25,90 €

incl. 19% VAT

(32,69 € excl. VAT)

plus

50+ On stock

Please select a model.

BAMBU LAB SUPPORT FOR PLA FILAMENT

Bambu Lab Support for PLA

Easy-removal breakaway support / interface filament for PLA prints – ideal for clean underside surfaces, complex overhangs, dense support contact areas and detailed PLA models.

Clean support interfaces for PLA prints

Bambu Lab Support for PLA is specifically developed for PLA printing and makes support removal easier after printing. The material is especially useful as a support interface when smooth underside surfaces, fine details and clean contact areas are required. It bonds more weakly to the PLA model material and can therefore be removed more easily by hand or with tools after printing.

Important: Use as support interface

Support for PLA should primarily be used for the contact areas between model and support, not as the entire support volume. This reduces material consumption, saves print time and improves surface quality in critical areas.

Developed for PLA

Easy to remove

AMS compatible

For support interfaces

Looking for soluble support filament? Use Bambu Lab PVA

Bambu Lab Support for PLA is a breakaway support material and is removed mechanically after printing. If water-soluble support is required – for example for internal cavities, hard-to-reach support structures or especially complex geometries – Bambu Lab PVA is the suitable alternative.

PVA dissolves in water after printing and can significantly simplify post-processing for complex PLA models. Important: PVA is highly moisture-sensitive and should be dried before printing and stored dry.

View Bambu Lab PVA alternative →

Highlights

Easy to remove

Weak bonding to PLA enables clean removal by hand or with tools.

Clean underside surfaces

Ideal for dense support interfaces, overhangs and areas with high surface-quality requirements.

AMS workflow

Suitable for automated material changes in Bambu Lab AMS and AMS lite.

Less post-processing

Reduces mechanical post-processing on contact areas and improves print quality for complex PLA models.

Technical Data

Material	Breakaway support material for PLA
Product Line	Bambu Lab Support for PLA
Material Type	Easy-removal support / interface material
Solubility	Not water-soluble; mechanically removable
Compatible Model Material	PLA filaments; test special materials such as PLA Aero beforehand
Diameter	1.75 mm
Net Filament Weight	0.5 kg
Nozzle Temperature	220–230 °C
Build Plate Temperature	35–45 °C with glue, depending on build surface
Build Surface	Cool Plate SuperTack, Smooth PEI Plate or Textured PEI Plate; glue recommended
Print Speed	Below 200 mm/s recommended
Nozzle Recommendation	All standard nozzle sizes possible; 0.4 mm as standard recommendation
AMS Compatibility	Compatible with AMS and AMS lite
Drying	55 °C for 8 hours recommended
Storage / Printing Humidity	Preferably below 20% RH; store sealed with desiccant
Density	1.33 g/cm³
Melting Temperature	190 °C
Special Properties	Easy removal, clean support interfaces, reduced post-processing, PLA optimization and AMS workflow

Typical Applications

PLA Support

Support Interface

Complex PLA Models

Overhangs

Clean Undersides

Detailed Prints

More Information from Bambu Lab

Visit the official Bambu Lab product page for more information about Support for PLA, print recommendations, compatibility and technical material data.

View Bambu Lab Support for PLA →

Printing Recommendation

Support for PLA should primarily be used as a support interface and not as a standalone model material. To maintain good part quality, contamination of the model material should be minimized with suitable purge volumes. For internal or inaccessible support structures, water-soluble PVA is often the better solution.

BAMBU LAB AT WELECTRON

Welectron provides professional advice, fast shipping and technical support for Bambu Lab 3D printers, filaments and accessories.

There are no reviews yet.