SIGLENT's SDS5000L series high-resolution digital storage oscilloscopes is with 8 analog channels, and bandwidth options of 350 MHz, 500 MHz, and 1 GHz. Both series feature 12-bit ADCs, a sampling rate of up to 5 GSa/s, and a maximum record length of 2.5 Gpts per channel.
These oscilloscopes utilize SIGLENT's SPO (Super Phosphor Oscilloscope) technology, offering a maximum waveform capture rate of up to 160,000 wfm/s. Additional display features include 256-level intensity grading and color temperature mode. They are equipped with an advanced digital trigger system, providing high sensitivity and low jitter, and support a wide range of triggering modes, including serial bus triggering.
To enhance analysis capabilities, tools such as History waveform recording, Search and Navigate, Mask Test, Bode Plot, and Power Analysis are included, allowing for comprehensive data capture and evaluation. A broad set of measurement and math functions, as well as serial decoding, further extends the instruments' utility.
The SDS5000L, a low-profile variant, omits the integrated display and digital channels. When used with the optional 64-channel synchronization distributor (SYN64), multiple SDS5000L units can be configured into a high-speed acquisition system with up to 512 synchronized channels. Alternatively, it can function as a standalone oscilloscope when connected to an external display and mouse.
The series supports remote web-based control over LAN. A comprehensive SCPI command set is available via the standard 1000M LAN interface, enabling high-speed data acquisition for automated testing applications.
- 8/6/4 analog channels for SDS5000X HD and 8 channels for SDS5000L
- Up to 1 GHz bandwidth with up to 5 GSa/s sample rate
- 12-bit ADC
- Low noise floor: 140 μVrms @ 1 GHz bandwidth (typical)
- SPO technology
- Waveform capture rates up to 160,000 wfm/s in normal mode and 650,000 wfm/s in sequence mode
- Supports 256-level intensity grading and color temperature display modes
- Up to 2.5 Gpts/ch waveform length
- Digital trigger system
- Intelligent trigger types: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay, and Video (HDTV supported)
- Zone Trigger simplifies advanced triggering
- Serial bus triggering and decoder with support for I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester, ARINC429
- Segmented acquisition (Sequence) mode with up to 170,000 segments and minimal dead time
- History waveform record (up to 170,000 frames)
- Automatic measurements on 60+ parameters with support for:
- Histogram
- Track
- Trend
- Gating measurement
- Measurements on Math, History, and Memory traces
- 8 Math traces (8 Mpts FFT, Filter, addition, subtraction, multiplication, division, integration, differential, square root, etc.), with formula editor
- Advanced data analysis functions:
- Search
- Navigate
- Digital Voltmeter
- Counter
- Waveform Histogram
- Bode plot
- Power Analysis
- Double Pulse Test
- High-speed hardware-based Average and Hi-Res
- Hardware-based Mask Test with Mask Editor tool
- 16 digital channels (only for SDS5000X HD)
- External 50 MHz waveform generator supported
- Interfaces include:
- 1x USB Host 3.0
- USB 2.0 Host
- USB 3.0 Device (USBTMC)
- 1000M LAN
- HDMI
- External Trigger In
- Aux Out (Pass/Fail, Trigger Out)
- 10 MHz In
- 10 MHz Out
- Built-in web server for remote control via LAN using a web browser
- Supports SCPI remote control commands
- Supports external mouse and keyboard
Model Overview
|
SDS5108L |
SDS5058L |
SDS5038L |
| Channels |
8 + EXT |
| Bandwidth |
1 GHz |
500 MHz |
350 MHz |
| Sample Rate |
5 GSa/s (quarter channel/half channel mode)
2.5 GSa/s (full channel mode) |
| Vertical Resolution |
12-bit
up to 16-bit in ERES Mode |
| Memory Depth |
2.5 Gpts/ch (quarter channel mode)
1 Gpts/ch (half channel mode)
500 Mpts/ch (full channel mode) |
| Waveform Capture Rate |
Normal mode: Up to 160,000 wfm/s; Sequence mode: Up to 650,000 wfm/s |
| Trigger type |
Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified, Nth edge,
Setup/hold, Delay, Serial |
| Serial Trigger/Decoder |
Standard: I2C, SPI, UART, CAN, LIN
Optional: CAN FD, FlexRay, I2
S, MIL-STD-1553B, SENT, Manchester (decode only), ARINC429 |
|
SDS5108L |
SDS5058L |
SDS5038L |
| Measurement |
60+ parameters. Statistics, histogram, trend, and track supported |
| Math |
8 traces
8 Mpts FFT, +, -, x, /, &intdt, d/dt, √, Identity, Negation, Absolute, Sign, ex, 10x, ln, lg, Interpolation,
MaxHold, MinHold, ERES, Average, Filter. Supports formula editor |
| Data analysis |
>Search, Navigate, History, Mask Test, Digital Voltmeter, Counter, Waveform Histogram, Bode plot Power Analysis, Double Pulse Test |
| Waveform generator (optional) |
SAG1021I USB isolated waveform generator module, frequency up to 50 MHz, 125 MSa/s sample rate, 16 kpts waveform memory |
| Probe(Standard) |
500 MHz, 1 probe supplied for each channel |
| Display |
|
| Digital channel |
|
| I/O |
I/O: USB 3.0 Host, USB 2.0 Host, USB 3.0, Device (USBTMC), 1000M LAN (VXI-11+SCPI, Telnet (5024)+SCPI, Socket (5025)+SCPI, LXI, WebServer), Display: HDMI, Others: External Trigger In, Aux Out (TRIG OUT, PASS/FAIL), 10 MHz In, 10 MHz Out |
Extended Specifications
Package Contents
- Device
- Power Cord
- USB Cable
- Quick Start Guide
-
Passive probe 1/channel, 500 MHz
-
Wireless mouse