Support materials for complex geometries. Some are water-soluble or easy to remove. Allow clean printing of challenging overhangs and internal cavities.
items 1 - 4 of 4
Bambu Lab Support for ABS is an easy-removal support / interface filament for ABS prints. It provides clean support contact surfaces, makes suppor removal easier and is AMS compatible. Important: it is not water-soluble. If a soluble support material for engineering plastics is required, we recommend Xioneer VXL 111A.
Bambu Lab Support for PLA is an easy-removal breakaway support / interface filament for PLA prints. It provides clean support contact surfaces, smooth underside areas and less post-processing for complex PLA models. Important: it is mechanically removable and not intended as a water-soluble support material. If soluble support is required, we recommend Bambu Lab PVA.
Bambu Lab PVA is a water-soluble support filament for complex PLA and PETG prints with overhangs, cavities and hard-to-reach support structures. After printing, the PVA is dissolved in water, enabling clean contact surfaces and allowing delicate models to be finished without time-consuming mechanical support removal.
New
Xioneer VXL 111 is a soluble high-performance support material for demanding multi-material FFF/FDM printing. It provides strong adhesion to engineering filaments such as ABS, ASA, PA, PC, PEEK or PEKK, is less moisture-sensitive than conventional water-soluble support materials and is dissolved using Xioneer VXL EX or VXL solve in a mild alkaline solution.
items 1 - 4 of 4