Arducam B0370 MINI OV5647 Wide angle camera module for Raspberry Pi 4/3/3 B+

Arducam B0370 MINI OV5647 Wide angle camera module for Raspberry Pi 4/3/3 B+

Artnr.: AC2-203700
HAN: B0370
Hersteller: Arducam

Arducam MINI OV5647 Wide angle camera module for Raspberry Pi 4/3/3 B+, and More

33,90 €

inkl. 19% MwSt.

(28,49 € exkl. MwSt.)

zzgl.

bestellbar
Lieferzeit: ca. 3 Monate (DE - Ausland abweichend)

Beschreibung
Kundenrezensionen

The Camera Module is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.
The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system.

Feature

An M12 Mount lens module that allow you to use various lens on Raspberry Pi
Focus the sharpest way – From less than an inch to infinity, you get easy focus control on a Raspberry Pi camera simply by spinning and tuning the lens and the locking ring. Check B0176 for software auto focus/manual focus
Compose the perfect frame – You decide how to frame up the best image by picking an m12 lens with the best FoV (Field of View) you need with a variety of M12 lenses on the market to choose from
Example projects – Shoot a waterdrop half an inch away with tuned focus; Shoot a QR code or A4 paper from the other end of the room with telephoto M12 lens; Stitch a panorama with fisheye m12 lens
Options – Get M12 lens set "Arducam LK001" for optical testing and "Arducam LK002" for minimum distortion in machine vision; Get "Arducam B0055" for m12 fisheye and "Arducam B003504" for m12 night vision. Get a lens without IR filter to make this camera IR sensitive. ( Contact Arducam for other options )

Sensor
- Sensor size: 1/4" (OV5647)
- Resolution: 5MP 2592×1944
- Video: 1080p 30 fps, 720p 60fps, 480p 90fps
Lens
- Focal Length: 1.3mm (You can screw the lens for focusing)
- Horizontal Field of View (HFOV): 155°
- Thread Size: M12×P0.5
Camera Board
- 3V3,GND,FREX,STROBE,VSYNC
- Dimension: 25×24 mm, 4 mounting holes

Peak Current: 300mA

Cellular phones, PDAs, Toys
Other battery-powered products
Where the official module fails in terms of focusing and Field of View,etc.

Lens holder: M12x0.5
5MPixel sensor
Integral IR filter
Max frame rate: 30fps
Connection by flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer board
The Camera Lens for Raspberry Pi Camera Board is LN060
OmniVision 5647 sensor in a fixed-focus module with replaceable Lense

1pcs 5 Megapixels OV5647 Sensor Camera Module
1pcs 15cm 15pin FPC cable

Note: – Raspberry Pi Type B Development Board is not included
– You might need extra m12 lenses to unlock its full potential
– Often, focusing a lens is performed while monitoring the image quality on a video screen.
– The Raspberry Pi motherboard is not included in the package

5MP OV5647 Standard Camera Modules

OV5647 Camera Module for Raspberry Pi Released

Use M12 Lenses on Raspberry Pi Camera V2 with Ease for Wide Angle, Telephoto and Macro Shooting, or Even Turn It into a Spy Camera

3Drawings https://www.welectron.com/mediafiles/productimg/arducam/Mechanical_Drawing/B0370.STEP

Es gibt noch keine Bewertungen.