Arducam U6279 LAN Cable Extension Kit for Camera Module on NVIDIA Jetson Orin Nano/Orin NX

Arducam U6279 LAN Cable Extension Kit for Camera Module on NVIDIA Jetson Orin Nano/Orin NX

Artnr.: AC9-762790
Hersteller: Arducam

Arducam LAN Cable Extension Kit for Camera Module on NVIDIA Jetson Orin Nano/Orin NX

56,90 €

inkl. 19% MwSt.

(47,82 € exkl. MwSt.)

ausverkauft
Lieferzeit: ca. 3 Monate (DE - Ausland abweichend)

Beschreibung
Kundenrezensionen

This LAN extension cable kit is a solution for connecting the camera module to the processor over long distances. Replacing the CSI cable (Camera Serial Interface) with a LAN/Ethernet cable extends the length of the available cable and places the camera module up to 10 meters away from the NVIDIA Jetson board. No additional drivers or software are required to control your camera module from a distance.
The extension kit consists of two parts: the transmitter board (Tx board), which is used to connect the camera module, and the receiver board (Rx board), which is securely fastened to the processor via GPIO pins. Below is the list of camera modules supported by the kit:

Supported Camera Modules	Video Modes
Product Series	for NVIDIA Jetson Orin Nano/Orin NX*
Camera Module V1 (OV5647)	Not supported
Camera Module V2 (IMX219)	3280x2464@21fps 3280x1848@28fps 1920x1080@30fps 1640x1232@30fps 1280x720@60fps
HQ Camera (IMX477)	4056x3040@10fps 2028x1520@30fps 2028x1080@30fps
Camera Module V3 (IMX708)	Not supported
Arducam IMX519 Camera	4656x3496@9fps 3840x2160@17fps 1920x1080@60fps 1280x720@120fps
Arducam 64MP Camera	Not supported
Arducam ToF Camera (B0410)	240x180@30fps
* Tested on Jetson Orin NX/Orin Nano (L4t36.3.0/Jetpack6.0). When used on the Orin Nano/Orin NX, a longer 15-22 pin FPC is needed.

Applications

UAV/Drones/FPV camera
Machine Vision
Robotics
Face Recognition
Defect Detection

Operation Steps

Operation Steps	Assembly Instructions
1	Plug the Rx board into the SBC board;
2	Plug the Tx board into the camera;
3	Connect the Rx and Tx boards with a network cable.

Package Including

1 x The Rx board
1 x Tx board
1 x 1-meter LAN cable
2 x 8cm ribbon flex cables for MIPI CSI-2 Transmission
2 x 7.3cm 15-22pin FPC Cable
1 x pack of mounting screws

Notes

The package contains small contents, please keep it away from children to avoid accidental ingestion
After receiving the package, please confirm whether the contents of the package are consistent with the description
No SBC board/Camera Board is included in the package

Documentation

Es gibt noch keine Bewertungen.