Beschreibung
4G HAT for Raspberry Pi
enabling LTE Cat-4 4G / 3G / 2G communication & GNSS positioning
Based on SIM7600G-H, Global Band
Features at a glance
- Connected via pogo pin or MicroUSB connector
- Dedicated pogo pin for Raspberry Pi Zero/Zero W
- MicroUSB connector for other Raspberry Pi boards or PC
- Incorporates SIM7600G-H global band 4G module, compatible with 2G/3G/4G network with global support
- USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access
- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, LBS base station positioning
- SIM card slot, supports 1.8V/3V SIM card
- Onboard audio jack and audio decoder for making telephone call
- 2x LED indicators, easy to monitor the operating status
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- Comes with development resources and manual (examples for Raspberry Pi)
Specifications
| Frequency band | |
|---|---|
| LTE Cat-4 | LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66 LTE-TDD: B34/B38/B39/B40/B41 |
| 3G | UMTS/HSDPA/HSPA+: B1/B2/B4/B5/B6/B8/B19 |
| 2G | GSM/GPRS/EDGE: 850/900/1800/1900 MHz |
| GNSS | |
| Satellite systems | GPS/Beidou/GLONASS |
| Receiver type | 16-channel |
| C/A Code | |
| Sensitivity | -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) |
| Cold starts: -148 dBm | |
| Time-To-First-Fix (open air) | Cold starts: <35s |
| Hot starts: <1s | |
| SMS and Audio | |
| SMS | Supported types: MT, MO, CB, Text, PDU |
| Audio feature | Supports echo cancellation |
| Supports noise reduction | |
| Other | |
| Power supply | 5V |
| Operating temperature | -30°C ~ 80°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 65.00 × 32.00mm |
Suitable for Raspberry Pi / PC
Dedicated pogo pin for connecting with Raspberry Pi Zero/Zero W without extra USB cableGeneral purpose MicroUSB connector for other Raspberry Pi boards or PC
Global band 4G / 3G / 2G support
up to 50Mbps uplink and 150Mbps downlink for 4G network *
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.
USB HUB feature
onboard USB HUB chip with USB2.0/1.1 compliant, providing 2x USB-A connector and 1x USB solder pad
GNSS positioning
Supports GPS, BeiDou, Glonass, LBS base station positioning
Telephoto call & SMS Support
Making telephoto call or sending SMS by AT commands, with onboard audio jack
Application example
What's on board
- SIM7600G-H
- FE1.1S USB HUB chip
- NAU8810 audio decoder
- MP1482 power chip
- RT9193-33 voltage translator
- USB HUB input D+/D- pogo pin: for Raspberry Pi Zero/Zero WMicroUSB connector: for other Raspberry Pi boards or PC
- Pogo pin power supply 5V: connects to 5V pin of Zero/Zero W, up to 2A currentGND: connects to GND pin of Zero/Zero W
- USB extended ports USB1~USB2: USB-A connectorsUSB3: solder pad
- SIM card slot supports 1.8V/3V SIM card
- 3.5mm earphone/mic jack
- MAIN antenna connector
- AUX auxiliary antenna connector
- GNSS antenna connector
- Power indicator
- Network status indicator
Outline Dimensions
Resources & Services
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Package Contents
- SIM7600G-H 4G HAT (B) x1
- LTE Antenna x1
- GPS Antenna x1
- USB-A to micro-B cable x1
- Screws pack x1
| Versandgewicht: | 0,20 Kg |
