Arducam B0176R Pi Camera for Octoprint Octopi Webcam with Motorized Lens

Arducam B0176R Pi Camera for Octoprint Octopi Webcam with Motorized Lens

Artnr.: AC2-201768
Hersteller: Arducam

Arducam Pi Camera for Octoprint Octopi Webcam with Motorized Lens, Adjustable Focal Length for Monitoring 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi

22,90 €

inkl. 19% MwSt.

(19,24 € exkl. MwSt.)

zzgl.

ab Lager lieferbar (knapper Bestand)
Lieferzeit: 1 - 3 Arbeitstage (DE - Ausland abweichend)

Beschreibung
Kundenrezensionen

Product description

Most 3D models take more than a few hours to print, so you may wish to leave the 3D printer at some point in the printing process. Using an Arducam camera to monitor 3D printing can make you pay close attention to your creation. Since most cameras are not made specifically for the use of 3D printing software, it is impossible to obtain proper support from the manufacturer. Fortunately, Arducam can help you solve all installation and setup problems.

For more details, please refer to our Doc page: https://www.arducam.com/docs/cameras-for-raspberry-pi/native-raspberry-pi-cameras/how-to-use-arducam-motorized-focus-camera-with-octopi-to-monitor-3d-printers/

Features

Hassle Free: Works as a native Raspberry Pi camera on Raspberry Pi 4/3B+/3 and more, and Arducam has solved the problems with the installation and setup on OctoPi.
Motorized Focus: See closer and easier than the fixed focus (1 m to infinity) lens, the minimum focal length is about 5CM, which is better to monitor the 3D printer nozzle and make you pay close attention to your creation.
Focus Controllable: A camera focus control plugin has been developed to control an Arducam motorized focus camera using the OctoPrint Control tab, which utilizes custom commands from your slicer to adjust focus while printing.
A Long Cable: 100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don't want to place the camera near the Raspberry Pi.

Sensor: 5MP OV5647
Still Picture: 2592×1944 Max
IR sensitivity: Integral IR filter, visible light only
Focus Type: Motorized focus
Field of View: 54°×44° (H×V)
Focusing Range: 2" to infinity
Board Size: 25mm × 24mm

Documentation

Manual

How to Use Motorized Focus Camera Module

Package Including

1×5MP OV5647 camera board with motorized lens for Raspberry Pi
1×5.9"(15cm) flex ribbon cable for Raspberry Pi Model A&B series (Pi Zero cable not included)
1×39.4"(100cm) flex ribbon cable for Raspberry Pi Model A&B series (Pi Zero cable not included)
2×Manuals

Video

Guide Video

Es gibt noch keine Bewertungen.